APC Easy UPS On-Line SRV 1000VA/800W 230V SRV1KI

  • Output power : 1000 VA/800 W
  • Input Voltage: 230 V
  • Output frequency: 50/60 Hz +/- 3 Hz sync to mains
  • UPS type: Double conversion online
  • Wave type: Sine wave
  • Efficiency: 88 % (full load)
  • Battery type: Lead-acid battery
  • Battery voltage: 24 V
  • Battery life: 3…5 year(s)
  • control panel: Multifunction LCD status and control console

KSh 41,000.00

This APC Single phase Easy UPS is designed for IT professionals or network administrators to maintain business uptime and continuity. This 1000VA double-conversion on-line tower UPS provides pure sine wave power to support critical electronics during power disruptions.


Automatic internal bypass: Supplies utility power to the connected loads in the event of a UPS power overload or fault.

Automatic restart of loads after UPS shutdown: Automatically starts up the connected equipment upon the return of utility power.

Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.

ECO Mode: Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection.

Input power factor correction: Minimizes installation costs by enabling the use of smaller generators and cabling.

Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.

Intelligent Card Slot: Customize UPS capabilities with management cards.

LCD graphics display: Text and mimic diagrams that display modes of operation, system parameters and alarms.

Serial connectivity: Provides management of the UPS via a serial port.

USB connectivity: Provides management of the UPS via a USB port (not available on all models).

Technical Specifications


Nominal Input Voltage: 230V
Input frequency: 40 – 70 Hz
Input Connection Type: IEC 60320 C14
output connection type: 3 IEC 60320 C13
Cord Length: 1.5meters
Input voltage range for main operations: 160 – 280V
Input voltage adjustable range for mains operation: 110 – 285 (half load)V
Number of Power Cords: 1


Output power capacity: 800Watts / 1.0kVA
Max Configurable Power (Watts): 800Watts / 1.0kVA
Nominal Output Voltage: 230V
Output Voltage Note: Configurable for 220 : 230 or 240 nominal output voltage
Efficiency at Full Load: 88.0 %
Output Frequency (sync to mains): 50/60Hz +/- 3 Hz
Other Output Voltages: 220, 240
Load Crest Factor: 3 : 1
Topology: Double Conversion Online
Waveform type: Sine wave
Output Connections: (3) IEC 320 C13 (Battery Backup)
Bypass: Internal Bypass (Automatic and Manual)


Product certifications: CE / UKCA / EAC / TISI
Standards: EN/IEC 62040-1:2019/A11:2021 | EN/IEC 62040-2:2006/AC:2006 | EN/IEC 62040-2:2018

Batteries & Runtime

Battery type: Lead-acid battery
Battery voltage: 24 V
Number of battery filled slots: 1
Number of battery free slots: 0
Battery recharge time: 4 h
Battery life: 3…5 year(s)
Battery charger power: 30 W rated


Ambient air temperature for operation: 0…40 °C
Relative humidity: 0…95 % non-condensing
Operating altitude: 0…3000 m
Ambient air temperature for storage: -20…50 °C
Storage Relative Humidity: 0…95 % non-condensing
Storage altitude: 0…15000 m
Acoustic level: 50 dBA
heat dissipation: 372 Btu/h
IP degree of protection: IP20

Communications & Management

Alarm: Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
Free slots: 1
control panel: Multifunction LCD status and control console

Surge Protection and Filtering
Surge energy rate: 600 J


Mounting location: Front
Mounting support: Floor
Mounting preference: No preference
Mounting mode: Not rack-mountable
USB compatible: Yes
Mounting position: Vertical

Colour: Black (RAL 7010)
Dimensions (WxDxH):
14.5 cm x 28.8 cm x 22.3 cm
Net weight:
9.3 kg